CMOS reduction

Some users tend to be curious changes some settings in the motherboard CMOS, which is precisely to cause a major cause of failure. If the computer failure is therefore the sky, then we can restore the CMOS settings to solve the problem. The method is very simple, boot, press the "Delete" key on your keyboard to enter the CMOS of the motherboard, select the "Load Optimized Defaults (to load the default setting), press" Y "key to confirm, save and exit the CMOS can.

Registry Recovery Act

Some users prefer to modify the registry to optimize the system settings or personalized settings, when some users browse the Internet malicious program changes the registry, some failure is caused by abnormal changes to the registry. Then we can restart the computer, and switch to MS-DOS mode, enter in the C root directory and execute "scanreg / restore" into the registry to restore the interface, and then select the registry file in a computer intact, " Restore (restore), you can achieve the restoration of the registry.

Streamline the start method

Part of the computer failure we install some software, if the computer can also enter the operating system, then we can in the Start menu, run "msconfig" program, turn off the boot menu, in addition to the internat., Scanregistry, Systemtray outside the program. Restart the computer if the fault no longer occurs, then the problem most of the software from the start by a result.
the logged Tracking Act

If the computer is unable to enter or enter into Windows is not normal, then we can adopt Logged (\ the Bootlog.txt) start the computer, Bootlog.txt file generated record appears in the following fault location. Logged way to start, press the F8 key on your Gateway NV5378U Keyboard when the system starts, it will boot menu, select Logged way to start, after the fault occurs, the Windows startup disk to restart the computer, and then the root directory of C Bootlog.txt file is copied to a floppy disk, open the file on another computer, you will find the above record Windows starts the whole process, where you'll find the root of the problem.

Equipment replacement method

The so-called equipment replacement, when you doubt what equipment to use the same function (preferably the same type) of equipment to replace it, If you replace the problem goes away, then most of this equipment there is a problem.

Minimum System Act

If you are not sure what hardware there is a problem, you can use the minimum system method to determine. The minimum system method is to remove the other hardware devices in the system, leaving only the three basic components of the motherboard, memory, graphics card, then boot to observe whether there are failures. If so, you can exclude other hardware failure should come from the three existing hardware. If there is no other hardware will be 11 to add, view, add which hardware failure, failures, then treatment can be for this hardware.