You are right !!

**HERE IT IS SOME NEWS AND UPDATES FROM ADMIN**Greetings Everyone,

We currently have 1577 verified members.

We cannot move forward until we determine whether or not we can

provide a solution to the problem discussed below.

==========

The Problem

We have tried to present a new and unique matrix model with the creation

of the ELAP concept. Many members have recognized our major problem

and this message from fellow member Leon Horton explains it nicely....

Begin

------------------------------------------------

Hi Ken and Keith,

I see that the matrix has grown to past level 16 now and it is too

large for even additional purchases of ELAPs to make anything

move. By my calculations, it will take 10 months of biweekly

purchases of ELAPs to fill the 17th level.

What has to happen is to, in some way, limit the size of the

matrix to only 12 levels so that when the biweekly purchases are

made and 6500 ELAPs can be added, it will cause positions on the

9th level to cycle. When those positions cycle, they will provide

2 ELAPs per position... which would be 512 new positions and

1,024 ELAPs added to the matrix on the next level down... which

is level 13. That is not enough to fill the bottom level and it will stall.

So, every time the matrix is at level 12, the top needs to be removed

so the maximum positions that can be filled on the level will not

exceed the total being put into that level. So, if you are asking 1,000

people to pay for 6,500 ELAPs then the maximum size of the level

being filled would need to be less than 6,500 in order to keep the

matrix from stalling out. The 12th level is 4,048 positions wide.

This would create the most fantastic operating system ever and you

would be forced to limit the number of members in order to keep

the maximum depth at a level that will function with each biweekly

purchase.

I am only trying to make suggestions that you may consider in order

to make the system work. I am not a programmer and could never

do that. If I could, I would be rich (from selling the script) and not

need to try every program out there to find one that will work.

So, please don't think that I am trying to undermine anything or what

has been done. I just do a little math from time to time and I can

analyze some of the math sometimes. I just don't have the ability to

put the math into a functional system.

But, I don't see any shuffling being able to work unless and until

the already cycled positions vacate the matrix and allow the matrix

to rebuild based on numerical order of the remaining positions.

Then an action would be needed to continually remove the cycled

positions from the top to keep the matrix at a much smaller size at

the bottom.

1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4,096, 8,192,

16,384, 32,768, 65,536

I calculated the levels through the 16th level (below the number 1).

So, my position, 52,731, would wind up on the 15th level.

Right now, I have another level of positions below mine where I have

2 people or ELAPs filling my first level on all 5 of my positions. It takes

65,536 positions to fill the 16th level and it will take twice that number

to fill the 17th and again double that to fill the 18th which would finally

cause my positions to cycle. So, if the you take in $13,000 to create

6,500 additional positions, it would take 10 months of biweekly payments

to fill only through the 17th level.

It is not feasible to expect the members to wait that long and pay that

much for, uh... nothing in return.

So, the only alternative is to keep the bottom level to a size that will

cause cycling to happen with the purchase of the additional ELAPs.

The answer would be to keep the matrix at a limited 12 levels deep.

That said, the ones that cycle will add more ELAPs to the matrix and

those positions should then be removed from the matrix to keep the

matrix at the limited depth.

What are your thoughts on this idea? Do you think there is a way

to pause the addition of positions in order to remove the top so the

maximum depth of the matrix does not exceed level 12?

JMHO

Peace,

Leon

-----------------------------------------------

End

The problem is easy to recognize. However, the solution is much more elusive.

Keith and I decided to use this weekend to focus on this issue and tomorrow

we will send an update.

Ken

HI Luicfer. Thank you for your honesty. IM OUT! Ken is a scammer deluxe. He has quite a history along with other serial scammers. This program can not sustain itself without new funds. This will fail soon and all the mnoney will go to Ken russo. Dont put a nickle in this mess.